For stage designers, theater technicians, and rental operators searching for detailed WB-T Series carbon fiber LED display specifications, the technical profile published by Shenzhen Showho (Whaley-LED) offers a comprehensive look at how this modular system addresses longstanding challenges in rental display deployment. This review consolidates the documented specifications, structural advantages, and application data for the WB-T Series.
Addressing Industry Pain Points with a Lightweight Design
Conventional rental display cabinets have historically been heavy, slow to install, costly to transport and store, and limited in creative stage assembly, with outdoor wind loads and maintenance adding further operational burden. The WB-T Series responds to these pain points through a modular, low-EMI, lighter design built on carbon fiber composite cabinet frames, achieving a documented weight reduction of 50% compared to the issues described. Installation efficiency is reported to improve by 50% through quick locks that enable fast ground-stacking and hanging installation, directly targeting the slow-setup concerns common in stage and theater environments.
Core Technical Specifications and Performance Metrics
The WB-T Series is built on a shared technology platform featuring interchangeable BY3.9 module and P7.81 transparent module components, with a light source model of SMD1921, a refresh rate of 7680 Hz, 16-bit grayscale, a viewing angle of >=160 degrees, and a service life of >=50000 h. The system operates on AC 100-240 V, with a maximum power consumption of 320 W/m² and an average power consumption of 160 W/m². It carries an IP65 protection rating, supports an operating temperature/humidity range of -20C ~ +45C / 10% ~ 90%RH, and a storage range of -40C ~ +60C / 10% ~ 90%RH.
WB-T3.9-7.8
This pixel pitch variant uses X 3.9 mm, Y 7.8 mm pitch, a 1/8 scan mode, a module size of 500*250 mm, and a module resolution of 128*32 dot. Brightness reaches black lamp <=2000 nits; white lamp <=4500 nits. Cabinet weights are A 10.5 kg, B1 6.3 kg, B2 6.9 kg, C 4.6 kg, with the wind-resistant frame version at A 15.5 kg.
WB-T5.9
This model carries a 5.9 mm pixel pitch with a 1/7 scan mode and module resolution of 84*42 dot. Brightness is rated at black lamp <=1600 nits; white lamp <=4500 nits. Cabinet weights are currently listed as “in design,” while the wind-resistant frame version weighs A 15 kg.
WB-T7.8
The 7.8 mm pitch configuration uses a 1/8 scan mode and a module resolution of 64*32 dot, with brightness of black lamp <=1500 nits; white lamp <=4500 nits. Cabinet weights are A 10 kg, B1 6.0 kg, B2 6.7 kg, C 4.4 kg, with the wind-resistant frame version at A 15 kg.
Modular Cabinet Sizes and Flexible Splicing
The WB-T Series is organized into four cabinet sizes—WB-T Series A (1000*1000mm), WB-T Series B1 (1000*500mm), WB-T Series B2 (500*1000mm), and WB-T Series C (500*500mm)—all built from carbon fiber material. These A, B1, B2, and C cabinet sizes freely combine and splice without visible gaps, allowing stage teams to build large, seamless surfaces or compact, irregular creative layouts without rebuilding infrastructure. Left and right arc locks allow adjustment at 0, +/-2.5, +/-5, +/-7.5, and +/-10 degrees, supporting curved, flat, and creative multi-screen configurations, including inner and outer right-angle splicing. The wind-resistant frame expands so the support rod forms a triangular structure with the display support, improving resistance to environmental wind force—an important consideration for outdoor rental deployments.
Installation, Transport, and Service Capabilities
Installation relies on quick locks supporting maximum hanging installation of 20 m and maximum ground-stacking installation of 20 m. Maintenance is simplified through front and rear module maintenance, a GOB process for scratch and collision resistance, and an integrated detachable control box that allows modular replacement.
Transport and storage logistics are addressed through a Quick-Assembly Cart supporting double-layer stacking and dual-row container-size loading, which compresses warehouse space and increases loading efficiency. Documented loading capacities include: a 17.5 m trailer carrying 50 cabinets/900 sq m, a 13 m trailer carrying 32 cabinets/576 sq m, a 12 m/40 ft container carrying 28 cabinets/504 sq m, and a 9.6 m vehicle carrying 20 cabinets/360 sq m. Each cabinet transport unit is noted as 18 LEDs per cabinet; weight: 240 kg.
Creative Assembly Case Study: Digital Cube
One documented application illustrates the platform’s flexibility for three-dimensional creative stage assembly. In this scenario, six LED display screens were right-angle assembled to create a Digital Cube, using the WB-T Series’ multiple assembly structures to achieve a three-dimensional display configuration that would be difficult with fixed, non-modular cabinets. This case demonstrates how the inner and outer right-angle splicing and mixed cabinet compatibility translate into practical, creative stage outcomes for theater and rental clients.
Business Model and After-Sales Support
The WB-T Series is delivered as a rental-oriented hardware system, supporting both ground-stacking and hanging installation, with the Quick-Assembly Cart handling transport and stacking logistics. After-sales support includes front and rear module maintenance, modular component interchange between compatible modules such as WB-T3.9 and WB-T7.8 transparent module, and GOB anti-collision treatment to reduce service disruptions during active rental cycles.
Summary
For organizations evaluating WB-T Series carbon fiber LED display specifications, the documented data points—from IP65 environmental protection and 7680 Hz refresh rates to the 50% weight reduction and 50% installation efficiency gains—outline a system designed specifically around the operational realities of high-end stage, theater, and rental display applications. The combination of modular cabinet sizing, interchangeable pixel pitch options (WB-T3.9-7.8, WB-T5.9, WB-T7.8), and purpose-built transport equipment positions the Shenzhen Showho (Whaley-LED) WB-T Series as a technically documented option for teams seeking lighter, faster-to-deploy, and creatively flexible rental LED display infrastructure.
http://www.whaleydisplay.com/
Shenzhen Showho (Whaley-LED)