From Virgin Pellet to Finished Film: A Biodegradable Resin Partner in Western China

Resin That Behaves the Same on Your Line as It Did on Ours

Buyers of biodegradable resin rarely struggle to find pellets. What they struggle to find is consistency: the same melt flow on the third container as on the first sample bag, a supplier who can explain why a film blew brittle last week, and a partner who will take a small trial order seriously before asking for a full-container commitment. Gansu Mogaojuhe Environmental Protection New Material Technology Co., Ltd. was built around that gap between chemistry and the factory floor.

Based in the Yongchang Economic Development Zone of Jinchang City, Gansu Province, we are a wholly-owned subsidiary of the A-share listed Mogao Co., Ltd. Our business covers the research, production and supply of PBAT and PBS fully biodegradable virgin pellets, PLA blended modified materials and biodegradable masterbatches, supported by downstream processing of mulch films and packaging products. That combination — resin synthesis plus real downstream conversion — is why our technical conversations with converters tend to start with their equipment rather than our catalogue.

A Focused Portfolio for Compostable and Biodegradable Applications

Our product range is deliberately narrow, so that each grade can be controlled in depth:

PBAT and PBS virgin pellets — fully biodegradable base resins produced at our own facility, with an annual virgin polyester capacity of 20,000 tons and a premium product rate of 99%. These are the building blocks for film, bag and packaging applications where both mechanical strength and end-of-life behaviour matter.

PLA blended modified materials — compounded grades that combine PLA with complementary biodegradable polymers to balance stiffness, toughness and processability, giving converters a workable window for blown film, casting or injection moulding.

Biodegradable masterbatches — functional masterbatches that let converters fine-tune colour, slip, antiblock or other characteristics without reformulating the base resin from scratch.

Downstream reference products — agricultural mulch films and packaging items produced in-house. We use these lines as a proving ground: a formula is not released to customers until it has run on equipment comparable to theirs.

Quality Systems You Can Audit, Not Just Take on Faith

Consistency is a process outcome, not a marketing claim. Three structural elements support it.

An in-house professional testing laboratory. Key indicators are measured on site rather than outsourced, which shortens the feedback loop between a production batch and the next formulation adjustment. For buyers, that means batch-to-batch variation is monitored continuously instead of being discovered at the film line.

A full set of national standard certifications and biodegradation accreditations. Documentation is available for buyers who need to satisfy their own customers, brand owners or regulatory reviewers. We are happy to discuss which documents are relevant to your market before you place an order, so expectations are clear on both sides.

Independent patented modification technology. Our portfolio includes a granted utility model patent covering a tail-gas treatment device for PBAT and PBS polycondensation (Patent No. ZL 2023 2 1879648.1, authorised on 27 February 2024). Beyond process compliance, it reflects a broader engineering habit: we prefer to solve production problems structurally rather than compensate for them downstream.

Toll Modification Processing: Send the Material, Keep the Formula Discipline

Many converters already hold PBAT inventory or have secured resin through their own channels, yet lack the compounding capability to turn it into a grade that suits a specific application. For these customers we operate as a toll modification partner.

We accept toll modification processing for the full range of PBAT materials, with customised formulas developed for film blowing, injection moulding, agricultural mulch films and food packaging bags. Fill levels and toughening systems can be adjusted on request, so a single base resin can be tuned toward stiffness, tear resistance, drawdown stability or cost targets depending on what your end product requires.

The engagement model is flexible by design. We support small-batch sample trials and prototyping for buyers who need to validate a formulation on their own equipment before scaling, as well as long-term mass processing orders for established programmes. Because our processing techniques are mature and our testing laboratory sits next to the line, iteration cycles stay short — a practical advantage when a packaging project has a fixed launch date.

Where the Material Ends Up

Our resins and modified compounds are used across applications where plastic waste is most visible and most regulated: agricultural mulch film that must degrade in the field rather than accumulate in it, shopping and carrier bags, food packaging bags, and general flexible packaging. Injection moulding grades serve rigid or semi-rigid biodegradable items, while masterbatches support converters who need to match a brand colour or fine-tune handling characteristics.

Because we also run downstream film and packaging processing ourselves, we understand the practical constraints our customers face — moisture sensitivity before extrusion, temperature windows on older screws, and the tension between thinner gauges and consistent mechanical performance. That shared vocabulary shortens the distance between a specification sheet and a production run that works.

Industry Insight: Cost Control Is Part of the Environmental Case

The biodegradable materials market is no longer a novelty segment. Brand owners are setting compostable packaging targets, retailers are responding to single-use plastic restrictions, and agricultural buyers are looking at mulch film as a residue problem rather than a pure cost line. At the same time, the price premium of biodegradable resin over conventional polyolefins remains the single biggest barrier to adoption.

That is why our location matters commercially. Situated in Gansu with access to local raw material supply, we are able to keep conversion and logistics costs under tight control without compromising on formulation. Combined with a 99% premium product rate that reduces waste and rework in the value chain, the total cost of a kilo of usable film — not just a kilo of pellets — becomes considerably more competitive. For distributors, this means a product that can be positioned credibly against both imported and domestic alternatives; for converters, it means less scrap and fewer rejected rolls.

How to Start Working With Us

Most of our international relationships begin with a technical conversation and a modest sample request. Tell us your application, your processing method, your target gauge or wall thickness, and any certification requirements your market imposes. We will respond with a recommended grade or a proposed toll modification route, along with the documentation you will need for evaluation. Sample trials are welcomed; long-term supply and processing agreements are built from there.

Whether you are a distributor building a biodegradable materials portfolio or a packaging manufacturer looking for a dependable compounding partner, we would be glad to discuss your requirements.

Contact

Company: Gansu Mogaojuhe Environmental Protection New Material Technology Co., Ltd.
Contact person: Liu Xingqi
Address: Inside Gansu Mogao Sunshine Environmental Protection Technology Co., Ltd., Eastern Development Zone, Yongchang County, Jinchang City, Gansu Province, P.R. China
Postal code: 737200
Phone: 18793102778
Email: Mang_wei@qq.com
Website: www.mogao-newmaterials.com

Send us your specification and application details, and we will come back with a grade recommendation and a sample plan.

Leave a Reply