41602M55R00 vs. 41601M55R00: Front Left and Right Shock Absorbers Explained

When sourcing suspension components for Suzuki Swift or Swift Dzire models, understanding the difference between part numbers 41602M55R00 and 41601M55R00 is essential. These two references correspond to the front-left and front-right shock absorber struts, respectively, for selected Indian-market Maruti Suzuki models equipped with the 1.2L K12M petrol engine.

Although both components perform the same basic suspension function, they are designed for different installation positions. They should not be ordered or installed interchangeably without first verifying the vehicle's compatibility and original equipment specifications.

The 41602M55R00 front-left shock absorber strut is an aftermarket replacement supplied by Yunxi for compatible Swift and Swift Dzire applications. Knowing how the left-hand and right-hand part numbers differ can help repair workshops avoid ordering mistakes and enable distributors to manage suspension parts inventory more efficiently.

Yunxi

What Is the Difference Between 41602M55R00 and 41601M55R00?

The primary difference between these two part numbers is their intended installation position. Part number 41602M55R00 refers to the front-left shock absorber strut, whereas 41601M55R00 is the corresponding front-right reference.

Both belong to the same general front suspension application, but each is designed for a specific side of the vehicle.

Item 41602M55R00 41601M55R00
Installation position Front left (LH) Front right (RH)
Part type Front suspension strut / shock absorber Front suspension strut / shock absorber
Vehicle application Selected Indian-market Maruti Suzuki Swift and Swift Dzire models Confirm the matching right-side application for the vehicle
Engine reference 1.2L K12M petrol Verify against the vehicle's OE reference and VIN
Ordering consideration Confirm the LH part number Confirm the RH part number

LH and RH indicate the vehicle's left-hand and right-hand sides when viewed from the driver's seated position while facing forward. These designations should not be determined by standing in front of the vehicle and looking toward the engine compartment.

When replacing both front struts, buyers should verify the two part numbers separately before placing an order. A listing for the left-hand component does not automatically confirm that every vehicle using that part requires the same right-hand reference.

Why Can't You Simply Swap the Left and Right Shock Absorbers?

Front suspension struts are engineered to match the mounting layout and structural configuration of a specific vehicle. Depending on the application, their brackets, mounting angles, attachment points, and other structural features may differ between the left and right sides.

As a result, two struts that look similar may not be suitable for installation on opposite sides of the vehicle.

Using an incorrect-side component can cause installation difficulties, improper positioning, or potentially unsafe suspension performance. Even when two parts appear almost identical, their compatibility should be verified through the OE number, vehicle specifications, and supplier fitment information rather than visual inspection alone.

For repair workshops and automotive parts distributors, correct side identification is particularly important when preparing quotations, selecting warehouse inventory, and supplying replacement components. Recording the LH or RH designation alongside the complete OE reference can significantly reduce the risk of sending the wrong part for a repair.

Which Suzuki Swift and Dzire Models Are Compatible?

According to the Yunxi product listing, the 41602M55R00 front-left strut is intended for selected Indian-market Maruti Suzuki Swift and Swift Dzire models equipped with the 1.2L K12M petrol engine.

The listed vehicle applications include:

  • Maruti Suzuki Swift, third generation: 2018–2020, 1.2L K12M petrol.

  • Maruti Suzuki Swift Dzire, third generation: 2017–2020, 1.2L K12M petrol.

  • Maruti Suzuki Swift Dzire facelift: 2020–2024, 1.2L K12M petrol.

These model-year ranges serve as application references and should not replace vehicle-specific fitment verification. Production specifications, regional versions, and equipment differences may affect suspension compatibility. The corresponding right-side part number must also be checked against the vehicle's original equipment reference.

Important: The 41602M55R00 listing is not intended for the older China-made Changan Suzuki Swift models produced from 2005 to 2016. Those vehicles use different references, such as 41602-63J00 or 41602-77J20. The part is also not listed for European Suzuki Swift AZ or Japanese domestic-market models.

Before purchasing, compare the original equipment number with the proposed replacement reference. Providing the vehicle identification number (VIN) to the supplier is also recommended whenever possible.

This verification step is particularly important for importers and wholesalers serving multiple markets, where vehicles sharing the same model name may have different suspension configurations.

What Are the Main Features of the Yunxi 41602M55R00 Strut?

A replacement shock absorber strut must match the vehicle's suspension specifications while providing reliable damping performance under normal driving conditions.

The Yunxi 41602M55R00 is described as an aftermarket front-left suspension strut featuring a steel body, chrome-plated piston rod, rubber mounting, and twin-tube hydraulic/gas-charged damping construction.

The steel body serves as the main structural housing, while its black corrosion-resistant finish helps protect the exterior in environments exposed to humidity, dust, and road salt. The chrome-plated piston rod provides a smooth working surface designed to withstand wear. Together with the internal damping assembly and sealing components, these features help support consistent suspension movement during everyday driving.

Its twin-tube construction is designed to control suspension oscillations as the wheels move over uneven road surfaces. When functioning correctly, the damper helps maintain more consistent tire contact with the road and contributes to predictable handling, driving comfort, and braking stability.

Actual performance depends on correct vehicle fitment, proper installation, tire condition, and the overall condition of the suspension system.

According to the product listing, the strut undergoes several checks before shipment, including pull testing, drop testing, salt-spray testing, and endurance-cycle testing. Buyers evaluating a China shock absorber manufacturer can consider these stated procedures alongside product specifications, sample evaluation, packaging standards, and warranty conditions.

The 41602M55R00 is supplied as an individual front-left replacement component. If both front struts need to be replaced, the corresponding right-side component must be sourced separately after its OE reference and vehicle application have been confirmed.

Should You Replace Both Front Shock Absorbers Together?

Replacing shock absorbers in pairs on the same axle is generally recommended when one unit has experienced significant deterioration.

The left and right dampers work together to control vehicle body movement. If one strut is considerably more worn than the other, the difference in damping performance may affect suspension balance and driving behavior.

Replacing both front struts may be particularly appropriate when:

  • The vehicle has accumulated high mileage.

  • Both front struts show visible signs of wear or leakage.

  • The opposite-side damper has an uncertain service history.

  • The technician identifies uneven damping performance between the two sides.

However, the final replacement decision should be based on a professional inspection of both components.

Maintenance should also cover the related suspension parts, as worn supporting components can contribute to abnormal noise, improper suspension movement, and reduced driving comfort.

During replacement, technicians should inspect the following:

  • Strut mount — 41710M55R00: Check for deteriorated rubber, excessive movement, or bearing-related noise.

  • Rebound bump stopper — 41720M55R00: Look for cracks, material deterioration, or other visible damage.

  • Dust boot: Make sure it continues to protect the piston rod from dust and debris.

  • Coil spring and spring seat: Inspect for cracks, corrosion, and other signs of damage.

  • Mounting hardware and wheel bearing: Check for looseness, wear, or damage in accordance with the vehicle manufacturer's repair procedures.

All related part numbers should be verified against the specific vehicle before ordering. After installation, follow the manufacturer's tightening specifications and check wheel alignment whenever required by the repair procedure or changes to suspension geometry.

How Can Wholesalers Avoid Left-and-Right Ordering Errors?

For automotive parts distributors, selecting the wrong installation side can result in product returns, delayed repairs, additional shipping expenses, and unnecessary warehouse handling.

A consistent fitment verification process can help minimize these issues.

First, record the complete OE part number, including every letter and digit. Avoid relying on shortened references or general descriptions such as "Swift front shock absorber."

Second, clearly identify the installation position as LH or RH. Third, verify the vehicle's market, model year, generation, and engine specification. Finally, confirm the application details with the supplier before completing the purchase.

Yunxi provides export packaging options for aftermarket buyers, including neutral packaging and customized logo, color-box, and labeling solutions. These options can support wholesalers and aftermarket retailers that require consistent packaging for distribution or private-label programs.

For bulk purchases, buyers should also confirm the minimum order quantity, sample availability, production lead time, packaging configuration, and applicable warranty terms directly with the supplier.

The product listing indicates that samples may be available within 3–7 days, with a typical production lead time of 15–30 days, depending on order details and final confirmation. Warranty periods vary according to product grade, so buyers should clarify the specific grade and warranty coverage before placing an order.

Distributors looking for additional suspension products can also explore Yunxi's shock absorber product range and car shock absorber category to compare other aftermarket options.

What Should You Confirm Before Ordering?

Before purchasing 41602M55R00 or 41601M55R00, buyers should complete the following checks:

  • Confirm whether the repair requires a front-left or front-right strut.

  • Match the OE part number with the vehicle's original specification.

  • Verify the model generation, model year, engine, and target market.

  • Provide the vehicle identification number (VIN) to the supplier whenever possible.

  • Inspect the opposite-side strut and related suspension components.

  • Confirm the packaging, product grade, production lead time, and warranty terms for wholesale orders.

The distinction between these two references is straightforward: 41602M55R00 identifies the front-left strut, while 41601M55R00 is the corresponding front-right reference. They should not be considered interchangeable.

For compatible Indian-market Maruti Suzuki Swift and Swift Dzire models equipped with the 1.2L K12M petrol engine, checking the OE reference and VIN before ordering remains the most reliable way to reduce fitment errors and avoid unnecessary delays during repairs.

For repair workshops, distributors, and aftermarket retailers, Yunxi offers an aftermarket sourcing option with defined product construction, export packaging support, and fitment information to help buyers make more informed purchasing decisions.

www.yunxiautopart.com
Yunxi

Leave a Reply